CRM -
Crew Resource Management - is the effective use of all available resources for flight crew personnel to assure a safe and efficient operation, reducing error, avoiding stress and increasing efficiency. CRM was developed as a response to new insights into the causes of aircraft accidents which followed from the introduction of flight data recorders (FDRs) and cockpit voice recorders (CVRs) into modern jet aircraft. Information gathered from these devices has suggested that many accidents do not result from a technical malfunction of the aircraft or its systems, nor from a failure of aircraft handling skills or a lack of technical knowledge on the part of the crew; it appears instead that they are caused by the inability of crews to respond appropriately to the situation in which they find themselves.
For example, inadequate communications between crew members and other parties could lead to a loss of situational awareness, a breakdown in teamwork in the aircraft, and, ultimately, to a wrong decision or series of decisions which result in a serious incident or a fatal accident.
The widespread introduction of the dynamic flight simulator as a training aid allowed various new theories about the causes of aircraft accidents to be studied under experimental conditions. On the basis of these results, and in an attempt to remedy the apparent deficiency in crew skills, additional training in flight deck management techniques has been introduced by most airlines.
Following a period of experimentation and development, the techniques embraced by the new training became known collectively as CRM. The importance of the CRM concept and the utility of the training in promoting safer and more efficient aircraft operations have now been recognized worldwide.
CRM encompasses a wide range of knowledge, skills and attitudes including communications, loss of situational awareness, problem solving, decision making, and teamwork; together with the entire attendant sub-disciplines which each of these areas entails. The elements which comprise CRM are not new but have been recognized in one form or another since aviation began, usually under more general headings such as ‘Airmanship’, ‘Captaincy’,
‘Crew Co-operation’, etc. In the past, however, these terms have not been defined, structured or articulated in a formal way, and CRM can be seen as an attempt to remedy this deficiency. CRM can therefore be defined as a management system which makes optimum use of all available resources - equipment, procedures and people - to promote safety and enhance the efficiency of flight operations.
CRM is concerned not so much with the technical knowledge and skills required to fly and operate an aircraft but rather with the cognitive and interpersonal skills needed to manage the flight within an organized aviation system. In this context, cognitive skills are defined as the mental processes used for gaining and maintaining situational awareness, for solving problems and for taking decisions.
Interpersonal skills are regarded as communications and a range of behavioral activities associated with teamwork. In aviation, as in other walks of life, these skill areas often overlap with each other, and they also overlap with the required technical skills.
Furthermore, they are not confined to multi-crew aircraft, but also relate to single pilot operations, which invariably need to interface with other aircraft and with various ground support agencies in order to complete their missions successfully.
Thanks & Regards,
Vidhya Ethiraj [BE (ECE) &MBA (HR)]
Manager HR
www.AeroSoftCorp.com
www.AeroSoft.co.in
On Line Assistance:
Gtalk: VidhyaE.AeroSoft@gmail.com
Mail me on: pay2flycrew@gmail.com
For example, inadequate communications between crew members and other parties could lead to a loss of situational awareness, a breakdown in teamwork in the aircraft, and, ultimately, to a wrong decision or series of decisions which result in a serious incident or a fatal accident.
The widespread introduction of the dynamic flight simulator as a training aid allowed various new theories about the causes of aircraft accidents to be studied under experimental conditions. On the basis of these results, and in an attempt to remedy the apparent deficiency in crew skills, additional training in flight deck management techniques has been introduced by most airlines.
Following a period of experimentation and development, the techniques embraced by the new training became known collectively as CRM. The importance of the CRM concept and the utility of the training in promoting safer and more efficient aircraft operations have now been recognized worldwide.
CRM encompasses a wide range of knowledge, skills and attitudes including communications, loss of situational awareness, problem solving, decision making, and teamwork; together with the entire attendant sub-disciplines which each of these areas entails. The elements which comprise CRM are not new but have been recognized in one form or another since aviation began, usually under more general headings such as ‘Airmanship’, ‘Captaincy’,
‘Crew Co-operation’, etc. In the past, however, these terms have not been defined, structured or articulated in a formal way, and CRM can be seen as an attempt to remedy this deficiency. CRM can therefore be defined as a management system which makes optimum use of all available resources - equipment, procedures and people - to promote safety and enhance the efficiency of flight operations.
CRM is concerned not so much with the technical knowledge and skills required to fly and operate an aircraft but rather with the cognitive and interpersonal skills needed to manage the flight within an organized aviation system. In this context, cognitive skills are defined as the mental processes used for gaining and maintaining situational awareness, for solving problems and for taking decisions.
Interpersonal skills are regarded as communications and a range of behavioral activities associated with teamwork. In aviation, as in other walks of life, these skill areas often overlap with each other, and they also overlap with the required technical skills.
Furthermore, they are not confined to multi-crew aircraft, but also relate to single pilot operations, which invariably need to interface with other aircraft and with various ground support agencies in order to complete their missions successfully.
Thanks & Regards,
Vidhya Ethiraj [BE (ECE) &MBA (HR)]
Manager HR
www.AeroSoftCorp.com
www.AeroSoft.co.in
On Line Assistance:
Gtalk: VidhyaE.AeroSoft@gmail.com
Mail me on: pay2flycrew@gmail.com
No comments:
Post a Comment